Driving in the rain can be a stressful experience, especially if you don't know how to use your back windshield wipers properly. Back windshield wipers are essential for maintaining visibility while driving in the rain or snow, and knowing how to use them can make your driving experience a lot safer and more comfortable. In this article, we will guide you through the steps of using back windshield wipers like a pro.
Step 1: Locate the Back Windshield Wiper Control
The first step in using your back windshield wipers is to locate the control. In most cars, the control is located on the right-hand side of the steering wheel, near the dashboard. The control usually has three settings: off, intermittent, and continuous. Make sure you know where the control is located before you start driving in the rain.
Step 2: Turn on the Back Windshield Wipers
Once you have located the control, it's time to turn on the back windshield wipers. Depending on the type of control in your car, you may need to turn a knob or push a button to activate the wipers. If your car has an intermittent setting, you can adjust the frequency of the wipers by turning the knob or pushing the button up or down. If your car has a continuous setting, the wipers will run at a constant speed until you turn them off.
Step 3: Adjust the Wiper Blade Position
Before you start driving, make sure that the wiper blades are in the correct position. The blades should be in contact with the windshield and should not be lifted off the glass. If the blades are not in the correct position, you may need to adjust them manually. This can usually be done by lifting the wiper arm and moving the blade into the correct position. Be careful not to damage the wiper arm or the windshield while adjusting the blades.
Step 4: Use the Wipers Effectively
Now that the wipers are on and in the correct position, it's time to use them effectively. Keep in mind that back windshield wipers are designed to remove water and debris from the glass, not to polish it. Therefore, it's important to avoid using them when the windshield is dry or dirty. This can cause unnecessary wear and tear on the wiper blades and may decrease their effectiveness over time.
Step 5: Turn off the Wipers
When you no longer need the back windshield wipers, it's important to turn them off. Leaving them on when they are not needed can cause unnecessary wear and tear on the blades and may decrease their effectiveness over time. To turn off the wipers, simply turn the control knob or push the button to the off position.
Conclusion
Driving in the rain can be a challenging experience, but with the right knowledge and skills, you can make it a lot safer and more comfortable. By following these simple steps, you can master the art of using back windshield wipers and enjoy a clearer view of the road ahead. Remember to always use your wipers responsibly and only when necessary, and you'll be well on your way to becoming a safer and more confident driver.
Komentar
Posting Komentar